Advantages:

1 Gypsona PoP Bandage be made of high-quality and white natural gypsum mineral materials.

2 The weight per unit area of the bandage shall not be less than 380 grams per square meter.

3 The supporting gauze of the bandage weighs no less than 25 grams per square meter.  

4 Warp and weft density of supporting gauze, weft yarn: no less than 18 per square inch of 40 yarns, warp yarn: no less than 28 per square inch of 40 yarns.    

5 The immersion time of the bandage, the bandage should completely absorb water for no more than 15 seconds.    

6 The bandage should have good plasticity, and there should be no uneven lumps and coarse powder falling.    

7 The curing time of the bandage is not less than 2 minutes and not more than 15 minutes, and there should be no softening phenomenon after curing.    

8 After the bandage is cured, its calorific value should be ≤42℃.    

9 After the bandage is cured, the surface is basically dry in 2 hours, and it is not easy to fall off.

Product Usage:

Orthopedics, fixation, molds, building materials decoration, artistic masks, etc.

Instructions for use:

1 Immersion:  gently submerge the plaster impregnated bandage obliquely in the water .

2 Squeeze dry: Use both hands to gently squeeze from both ends to the center to remove excess water.

3 Shaping: Wrap 6-8 layers for general parts and 8-10 layers for stressed parts.

4 Leveling: Leveling is performed while bandaging, to remove air bubbles in the plaster impregnated bandage, make the adhesion between the layers even.